New ATS48D22Q SCHNEIDER ELECTRIC SOFT SPLITTER ALTISTART 48 (11 KW, 15 HP, 23 AMPERS)

Altistart 48

Soft starter

Asynchronous motors

Heavy duty industry and pumps

ATS48

230...415 V - 15...10 %

7.5 kW at 230 V connection to the motor delta terminals for severe applications
7.5 kW at 400 V connection in the motor supply line for severe applications
9 kW at 230 V connection to the motor delta terminals for standard applications
11 kW at 400 V connection in the motor supply line for standard applications
15 kW at 400 V connection to the motor delta terminals for severe applications
18.5 kW at 400 V connection to the motor delta terminals for standard applications
4 kW at 230 V connection in the motor supply line for severe applications
5.5 kW at 230 V connection in the motor supply line for standard applications

59 W for severe applications
74 W for standard applications

AC-53A

Start with torque control (current limited to 5 In)

22 A for connection in the motor supply line for severe applications
22 A for connection in the motor supply line for standard applications
38 A for connection to the motor delta terminals for severe applications
38 A for connection to the motor delta terminals for standard applications

IP20

With heat sink

External bypass (optional)

195…456 V

50...60 Hz - 5...5 %

47.5...63 Hz

To the motor delta terminals
In the motor supply line

21 A

220 - 15 % to 415 + 10 %, 50/60 Hz

30 W

2

(LO1) logic output 0 V common configurable
(LO2) logic output 0 V common configurable
(R1) relay outputs fault relay NO
(R2) relay outputs end of starting relay NO
(R3) relay outputs motor powered NO

+/- 5 %

10 mA at 6 V DC for relay outputs

Logic output 0.2 A at 30 V DC
Relay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5 20 ms
Relay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5 20 ms

5

PTC, 750 Ohm at 25 °C
(Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm

24 V <= 30 V

Positive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA

0.4...1.3 Icl adjustable

Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm

Modbus

1 RJ45

Serial

RS485 multidrop

4800, 9600 or 19200 bps

31

Phase failure: line
Thermal protection: motor
Thermal protection: starter

CE

Natural convection

Vertical +/- 10 degree

275 mm

160 mm

190 mm

4.9 kg

7…11 kW at 200…240 V 3 phases
7…11 kW at 380…440 V 3 phases
15…25 kW at 380…440 V 3 phases
4…6 kW at 200…240 V 3 phases

Soft starter

Conducted and radiated emissions level A conforming to IEC 60947-4-2
Conducted and radiated emissions level B conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Voltage/current impulse level 3 conforming to IEC 61000-4-5

EN/IEC 60947-4-2

SEPRO
UL
CCC
DNV
CSA
TCF
C-Tick
NOM 117
GOST

1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6

15 gn for 11 ms conforming to EN/IEC 60068-2-27

Level 3 conforming to IEC 60664-1

0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3

40…60 °C (with current derating of 2 % per °C)
-10…40 °C (without derating)

-25…70 °C

<= 1000 m without derating
> 1000...2000 m with current derating of 2.2 % per additional 100 m

PCE

1

5.701 kg

29 cm

26 cm

37 cm

Green Premium product

Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration

Yes

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins