Home > Used ATS48D32Q SCHNEIDER ELECTRIC SOFT SPLITTER ALTISTART (15 KW, 20 HP, 32 AMPERS) tested good
Used ATS48D32QSCHNEIDER ELECTRIC SOFT SPLITTER ALTISTART (15 KW, 20 HP, 32 AMPERS) tested good Maximize

Used ATS48D32Q SCHNEIDER ELECTRIC SOFT SPLITTER ALTISTART (15 KW, 20 HP, 32 AMPERS) tested good

$560.00

Main
range of productAltistart 48 
product or component typeSoft starter 
product destinationAsynchronous motors 
product specific applicationHeavy duty industry and pumps 
device short nameATS48 
power supply voltage230...415 V - 15...10 % 
motor power kW7.5 kW at 230 V connection in the motor supply line for standard applications
9 kW at 230 V connection to the motor delta terminals for severe applications
11 kW at 400 V connection in the motor supply line for severe applications
15 kW at 230 V connection to the motor delta terminals for standard applications
15 kW at 400 V connection in the motor supply line for standard applications
18.5 kW at 400 V connection to the motor delta terminals for severe applications
22 kW at 400 V connection to the motor delta terminals for standard applications
5.5 kW at 230 V connection in the motor supply line for severe applications		 
power dissipation in W104 W for standard applications
74 W for severe applications		 
utilisation categoryAC-53A 
type of startStart with torque control (current limited to 5 In) 
Icl nominal current32 A for connection in the motor supply line for severe applications
32 A for connection in the motor supply line for standard applications
55 A for connection to the motor delta terminals for severe applications
55 A for connection to the motor delta terminals for standard applications		 
IP degree of protectionIP20 
Complementary
assembly styleWith heat sink 
function availableExternal bypass (optional) 
power supply voltage limits195…456 V 
power supply frequency50...60 Hz - 5...5 % 
power supply frequency limits47.5...63 Hz 
device connectionIn the motor supply line
To the motor delta terminals		 
factory setting current28.5 A 
[Uc] control circuit voltage220 - 15 % to 415 + 10 %, 50/60 Hz 
control circuit consumption30 W 
discrete output number2 
discrete output type(LO1) logic output 0 V common configurable
(LO2) logic output 0 V common configurable
(R1) relay outputs fault relay NO
(R2) relay outputs end of starting relay NO
(R3) relay outputs motor powered NO		 
output absolute accuracy precision+/- 5 % 
minimum switching current10 mA at 6 V DC for relay outputs 
maximum switching currentLogic output 0.2 A at 30 V DC
Relay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5 20 ms
Relay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5 20 ms		 
discrete input number5 
discrete input typePTC, 750 Ohm at 25 °C
(Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm		 
discrete input voltage24 V <= 30 V 
discrete input logicPositive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA 
starting current0.4...1.3 Icl adjustable 
analogue output typeCurrent output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm 
communication port protocolModbus 
connector type1 RJ45 
communication data linkSerial 
physical interfaceRS485 multidrop 
transmission rate4800, 9600 or 19200 bps 
max nodes number31 
protection typePhase failure: line
Thermal protection: motor
Thermal protection: starter		 
markingCE 
type of coolingForced convection 
operating positionVertical +/- 10 degree 
height275 mm 
width160 mm 
depth190 mm 
net weight4.9 kg 
Motor power range AC-315…25 kW at 200…240 V 3 phases
7…11 kW at 200…240 V 3 phases
7…11 kW at 380…440 V 3 phases
15…25 kW at 380…440 V 3 phases
4…6 kW at 200…240 V 3 phases		 
motor starter typeSoft starter 
Environment
electromagnetic compatibilityConducted and radiated emissions level A conforming to IEC 60947-4-2
Conducted and radiated emissions level B conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Voltage/current impulse level 3 conforming to IEC 61000-4-5		 
standardsEN/IEC 60947-4-2 
product certificationsNOM 117
CSA
SEPRO
CCC
C-Tick
UL
TCF
DNV
GOST		 
vibration resistance1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6		 
shock resistance15 gn for 11 ms conforming to EN/IEC 60068-2-27 
noise level52 dB 
pollution degreeLevel 3 conforming to IEC 60664-1 
relative humidity0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 
ambient air temperature for operation40…60 °C (with current derating of 2 % per °C)
-10…40 °C (without derating)		 
ambient air temperature for storage-25…70 °C 
operating altitude<= 1000 m without derating
> 1000...2000 m with current derating of 2.2 % per additional 100 m		 
Packing Units
Unit Type of Package 1PCE 
Number of Units in Package 11 
Package 1 Weight5.721 kg 
Package 1 Height26 cm 
Package 1 width28.5 cm 
Package 1 Length37 cm 
Unit Type of Package 2P06 
Number of Units in Package 28 
Package 2 Weight58.768 kg 
Package 2 Height73.5 cm 
Package 2 width80 cm 
Package 2 Length60 cm 
Offer Sustainability
Sustainable offer statusGreen Premium product 
EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration		 
Mercury freeYes 
RoHS exemption informationYes 
China RoHS RegulationChina RoHS declaration 
Environmental DisclosureProduct Environmental Profile 
Circularity ProfileEnd of Life Information 
WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Contact us

Our support hotline is available 24/7.

Contact our expert support team!

PayPal