New ATV212H075N4 SCHNEIDER ELECTRIC VDF ALTIVAR 212 8B 1311 565071 (0,75 KW, 1 HP, 4 AMPERS

Altivar 212

Variable speed drive

ATV212

Asynchronous motors

Pumps and fans in HVAC

With heat sink

3 phases

0.75 kW

1 hp

380...480 V - 15...10 %

323…528 V

50...60 Hz - 5...5 %

Class C2 EMC filter integrated

1.4 A at 480 V
1.7 A at 380 V

1.6 kVA at 380 V

5 kA

2.2 A at 380 V
2.2 A at 460 V

2.4 A for 60 s

0.5…200 Hz

12 kHz

6...16 kHz adjustable
12...16 kHz with derating factor

1…10

+/- 10 % of nominal slip 0.2 Tn to Tn

+/- 15 %

120 % of nominal motor torque +/- 10 % for 60 s

Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)
Voltage/frequency ratio - Energy Saving, quadratic U/f
Voltage/frequency ratio, 2 points
Flux vector control without sensor, standard
Voltage/frequency ratio, 5 points

Adjustable PI regulator

Not available in voltage/frequency ratio motor control
Automatic whatever the load
Adjustable

1 LED (red)DC bus energized:

<= power supply voltage

Electrical between power and control

Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPR
Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC
With UL Type 1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC

VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES: terminal 2.5 mm² / AWG 14
L1/R, L2/S, L3/T: terminal 6 mm² / AWG 10

1.3 N.m, 11.5 lb.in (L1/R, L2/S, L3/T)
0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)

Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 A, protection type: overload and short-circuit protection
Internal supply: 24 V DC (21…27 V), <200 A, protection type: overload and short-circuit protection

2

VIA switch-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bits
VIB configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bits
VIB configurable PTC probe: 0...6 probes, impedance: 1500 Ohm
VIA switch-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 10 bits

2 ms +/- 0.5 ms F discrete
2 ms +/- 0.5 ms R discrete
2 ms +/- 0.5 ms RES discrete
3.5 ms +/- 0.5 ms VIA analog
22 ms +/- 0.5 ms VIB analog

FM 2 ms, tolerance +/- 0.5 ms for analog output(s)
FLA, FLC 7 ms, tolerance +/- 0.5 ms for discrete output(s)
FLB, FLC 7 ms, tolerance +/- 0.5 ms for discrete output(s)
RY, RC 7 ms, tolerance +/- 0.5 ms for discrete output(s)

+/- 0.6 % (VIA) for a temperature variation 60 °C
+/- 0.6 % (VIB) for a temperature variation 60 °C
+/- 1 % (FM) for a temperature variation 60 °C

VIA: +/- 0.15 % of maximum value for input
VIB: +/- 0.15 % of maximum value for input
FM: +/- 0.2 % for output

1

FM switch-configurable voltage 0...10 V DC, impedance: 7620 Ohm, resolution 10 bits
FM switch-configurable current 0...20 mA, impedance: 970 Ohm, resolution 10 bits

2

Configurable relay logic: (FLA, FLC) NO - 100000 cycles
Configurable relay logic: (FLB, FLC) NC - 100000 cycles
Configurable relay logic: (RY, RC) NO - 100000 cycles

3 mA at 24 V DC for configurable relay logic

5 A at 250 V AC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)
5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)
2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)
2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)

F programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
R programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
RES programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm

Positive logic (source) (F, R, RES), <= 5 V (state 0), >= 11 V (state 1)
Negative logic (sink) (F, R, RES), >= 16 V (state 0), <= 10 V (state 1)

Automatic based on the load
Linear adjustable separately from 0.01 to 3200 s

By DC injection

Overheating protection: drive
Thermal power stage: drive
Short-circuit between motor phases: drive
Input phase breaks: drive
Overcurrent between output phases and earth: drive
Overvoltages on the DC bus: drive
Break on the control circuit: drive
Against exceeding limit speed: drive
Line supply overvoltage and undervoltage: drive
Line supply undervoltage: drive
Against input phase loss: drive
Thermal protection: motor
Motor phase break: motor
With PTC probes: motor

3535 V DC between earth and power terminals
5092 V DC between control and power terminals

>= 1 mOhm 500 V DC for 1 minute

Display unit: 0.1 Hz
Analog input: 0.024/50 Hz

Modbus
METASYS N2
APOGEE FLN
LonWorks
BACnet

1 open style
1 RJ45

2-wire RS 485

RTU

9600 bps or 19200 bps

8 bits, 1 stop, odd even or no configurable parity

No impedance

1…247

Read device identification (43)
Time out setting from 0.1 to 100 s
Write single register (06)
Write multiple registers (16) 2 words maximum
Monitoring inhibitable
Read holding registers (03) 2 words maximum

Communication card for LonWorks

Vertical +/- 10 degree

107 mm

143 mm

150 mm

2 kg

55 W

19 m3/h

Mid

HVAC

IP21

Compressor for scroll Building - HVAC
Fan Building - HVAC
Pump Building - HVAC

0.55…1 kW at 380…440 V 3 phases
0.55…1 kW at 480…500 V 3 phases

Variable speed drive

Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11

2 conforming to IEC 61800-5-1

IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1
IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529
IP21 conforming to EN/IEC 61800-5-1
IP21 conforming to EN/IEC 60529
IP41 on upper part conforming to EN/IEC 61800-5-1
IP41 on upper part conforming to EN/IEC 60529

1.5 mm (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-8

15 gn for 11 ms conforming to IEC 60068-2-27

Classes 3C1 conforming to IEC 60721-3-3
Classes 3S2 conforming to IEC 60721-3-3

51 dB conforming to 86/188/EEC

1000...3000 m limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m
<= 1000 m without derating

5…95 % without condensation conforming to IEC 60068-2-3
5…95 % without dripping water conforming to IEC 60068-2-3

-10…40 °C (without derating)
40…50 °C (with derating factor)

-25…70 °C

EN 55011 class A group 1
EN 61800-3 environments 1 category C3
EN 61800-3 environments 2 category C2
EN 61800-3 environments 2 category C1
EN 61800-3 category C3
IEC 61800-3 environments 1 category C2
EN 61800-3 environments 1 category C2
IEC 61800-3 environments 2 category C3
IEC 61800-5-1
EN 61800-3 environments 1 category C1
UL Type 1
IEC 61800-3 category C2
EN 61800-3
IEC 61800-3
IEC 61800-3 environments 1 category C1
EN 61800-3 category C2
IEC 61800-3 environments 2 category C1
IEC 61800-3 environments 2 category C2
IEC 61800-3 category C3
EN 61800-3 environments 2 category C3
IEC 61800-3 environments 1 category C3
EN 61800-5-1

UL
NOM 117
CSA
C-Tick

CE

PCE

1

1.937 kg

18.5 cm

18 cm

21.5 cm

P06

27

65.11 kg

80 cm

80 cm

60 cm

Green Premium product

Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration

Yes

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins